Chapter 42 Object
ZyWALL/USG Series User’s Guide
765
42.5.2.1 Add Application Group Rule
Click Add in Configuration > Object > Application > Application Group to select already
created application rules and combine them as a single new rule.
Figure 523 Configuration > Object > Application > Application > Add Application Group Rule
The following table describes the labels in this screen.
42.6 Address/Geo IP Overview
Address objects can represent a single IP address or a range of IP addresses. Address groups are
composed of address objects and other address groups.
•The Address screen (Section 42.6.2 on page 766) provides a summary of all addresses in the
ZyWALL/USG. Use the Address Add/Edit screen to create a new address or edit an existing
one.
Table 306 Configuration > Object > Application > Application > Add Application Group Rule
LABEL DESCRIPTION
Name Enter a name for the group. You may use 1-31 alphanumeric characters, underscores(_),
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
Description This field displays the description of each group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
Member List The Member list displays the names of the application and application group objects that
have been added to the application group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
