ZyXEL Communications WAC500 - Page 100

Chapter 8 Monitor
NWA/WAC/WAX Series User’s Guide
100
Figure 59 Monitor > Wireless > Detected Device (for Zyxel Device that does not support Monitor mode)
The following table describes the labels in this screen.
Table 37 Monitor > Wireless > Detected Device
LABEL DESCRIPTION
Discovered APs
Rogue AP This shows how many devices are detected as rogue APs.
Suspected rogue
AP
This shows how many devices are detected as possible rogue APs based on the classification
rule(s) in Section 10.3 on page 124.
Friendly AP This shows how many devices are detected as friendly APs.
Un-classified AP This shows how many devices are detected, but have not been classified as either Rogue or
Friendly by the Zyxel Device.
Detect Now Click this button for the Zyxel Device to scan for APs in the network.
Detected Device
Mark as Rogue
AP
Click this button to mark the selected AP as a rogue AP. For more on managing rogue APs, see
the Configuration > Wireless > Rogue AP screen (Section 10.3 on page 124).
Mark as Friendly
AP
Click this button to mark the selected AP as a friendly AP. For more on managing friendly APs,
see the Configuration > Wireless > Rogue AP screen (Section 10.3 on page 124).
# This is the detected device’s index number in this list.
Status This indicates the detected device’s status.
Device This indicates the type of device detected.
Role This indicates the detected device’s role (such as friendly or rogue).
Classified by This indicates the detected device’s classification rule.
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.