Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
56
3.4.4 WAC6103D-I
The following are the LED descriptions for your WAC6103D-I.
Management Green On The Zyxel Device is managed by a the NCC or an AC.
Slow Blinking (Blink for 3
times, Off for 3s)
The Zyxel Device is searching (discovery) for an AC.
Slow Blinking (On for 1s,
Off for 1s)
The Zyxel Device is using default WiFi settings, or the Zyxel
Device is connected to the NCC but is unregistered with
the NCC.
Off The Zyxel Device is in standalone mode.
Amber Blinks between amber
and green alternately
(1 second interval).
The Zyxel Device is searching (discovery) for the NCC.
Green
Amber Blinks between amber
and green alternately 3
times and then turns
solid green for 3
seconds.
The NCC is connecting to the registered Zyxel Device.
Green
WLAN Green On The 2.4 GHz WLAN is active.
Off The 2.4 GHz WLAN is not active.
WLAN Green On The 5 GHz WLAN is active.
Off The 5 GHz WLAN is not active.
UPLINK Amber On The port is operating as a 100 Mbps connection.
Blinking The Zyxel Device is sending/receiving data through the
port at 100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The Zyxel Device is sending/receiving data through the
port at 1 Gbps.
Off The port is not connected.
LAN Amber On The port is operating as a 100 Mbps connection.
Blinking The LAN port is sending/receiving data through the port
at 100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The LAN port is sending/receiving data through the port
at 1 Gbps.
Off The LAN port is not connected.
Locator White Blinking The Locator is activated and will blink to show the actual
location of the Zyxel Device between several devices in
the network.
Off The Locator function is off.
Table 17 WAC6502D-E, WAC6502D-S, or WAC6503D-S LEDs (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
