Chapter 13 AP Profile
NWA/WAC/WAX Series User’s Guide
175
MAC addresses that are not listed in the layer-2 isolation table are blocked from communicating with
the Zyxel Device’s WiFi clients except for broadcast packets. Layer-2 isolation does not check the traffic
between WiFi clients that are associated with the same AP. Intra-BSS traffic allows WiFi clients associated
with the same AP to communicate with each other.
This screen allows you to specify devices you want the users on your WiFi networks to access. To access
this screen click Configuration > Object > AP Profile > SSID > Layer-2 Isolation List.
Figure 107 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
The following table describes the labels in this screen.
13.6.1 Add/Edit Layer-2 Isolation Profile
This screen allows you to create a new layer-2 isolation profile or edit an existing one. To access this
screen, click the Add button or select a layer-2 isolation profile from the list and click the Edit button.
Note: You need to know the MAC address of each WiFi client, AP, computer or router that
you want to allow to communicate with the Zyxel Device's WiFi clients.
Table 70 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
LABEL DESCRIPTION
Add Click this to add a new layer-2 isolation profile.
Edit Click this to edit the selected layer-2 isolation profile.
Remove Click this to remove the selected layer-2 isolation profile.
Object
Reference
Click this to view which other objects are linked to the selected layer-2 isolation profile (for
example, SSID profile).
# This field is a sequential value, and it is not associated with a specific user.
Profile Name This field indicates the name assigned to the layer-2 isolation profile.
To Next Page
Loading...
