NWA/WAC/WAX Series User’s Guide
251
CHAPTER 23
Reboot
23.1 Overview
Use this screen to restart the Zyxel Device.
23.1.1 What You Need To Know
If you applied changes in the Web Configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the Zyxel Device to its default configuration.
23.2 Reboot
This screen allows remote users can restart the Zyxel Device. To access this screen, click Maintenance >
Reboot.
Figure 158 Maintenance > Reboot
Click the Reboot button to restart the Zyxel Device. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the Zyxel Device in your Web browser.
You can also use the CLI command reboot to restart the Zyxel Device.
To Next Page
Loading...
