Chapter 22 Antenna Switch
NWA/WAC/WAX Series User’s Guide
250
Figure 156 Maintenance > Antenna > Antenna Switch (Per Radio)
Figure 157 Maintenance > Antenna > Antenna Switch (Per AP)
If the Zyxel Device has a physical antenna switch, select the Enable Software Control option to use the
Web Configurator to adjust coverage depending on each radio’s antenna orientation for better
coverage.
Select Wall if you mount the Zyxel Device to a wall. Select Ceiling if the Zyxel Device is mounted on a
ceiling. You can switch from Wall to Ceiling if there are still wireless dead zones, and vice versa.
Click Apply to save your changes or click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
