ZyXEL Communications WAC500 - NWA1123-Acv2

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
42
3.3.1 NWA1123-ACv2
Figure 16 NWA1123-ACv2 LED
The following are the LED descriptions for your NWA1123-ACv2.
Table 10 NWA1123-ACv2 LED
COLOR STATUS DESCRIPTION
Amber Blinks between amber
and green alternately (1
second interval).
The LED blinks between amber and green alternately when
the Zyxel Device is booting up or is connecting to the NCC.
Green
Amber Blinks between amber
and green alternately 3
times and then turns solid
green for 3 seconds.
The Zyxel Device is discovering the NCC.
Green
Green On The Zyxel Device is ready for use and its wireless interface is
activated.
Slow Blinking (On for 1s,
Off for 1s)
The wireless module of the Zyxel Device is disabled or failed,
the Zyxel Device is using default wireless settings, or the Zyxel
Device is connected to the NCC but is unregistered with the
NCC.
Fast Blinking (On for 50 ms,
Off for 50 ms)
The Locator LED is on.
Amber On The Zyxel Device is powered up.