NWA/WAC/WAX Series User’s Guide
198
CHAPTER 17
System
17.1 Overview
Use the system screens to configure general Zyxel Device settings.
17.1.1 What You Can Do in this Chapter
•The Host Name screen (Section 17.2 on page 198) configures a unique name for the Zyxel Device in
your network.
• The Power Mode screen (Section 17.3 on page 199) configures the Zyxel Device’s power settings.
• The Date/Time screen (Section 17.4 on page 200) configures the date and time for the Zyxel Device.
• The WWW screens (Section 17.5 on page 203) configure settings for HTTP or HTTPS access to the Zyxel
Device.
• The SSH screen (Section 17.6 on page 211) configures SSH (Secure SHell) for securely accessing the
Zyxel Device’s command line interface.
•The FTP screen (Section 17.7 on page 215) specifies FTP server settings. You can upload and
download the Zyxel Device’s firmware and configuration files using FTP. Please also see Chapter 19 on
page 232 for more information about firmware and configuration files.
• The SNMP screens (Section 17.8 on page 216) configure the Zyxel Device’s SNMP settings, including
profiles that define allowed SNMPv3 access.
17.2 Host Name
A host name is the unique name by which a device is known on a network. Click Configuration > System
> Host Name to open this screen.
Figure 120 Configuration > System > Host Name
To Next Page
Loading...
