Chapter 7 Setup Wizard
NWA/WAC/WAX Series User’s Guide
86
Figure 47 Wizard: SSID: Edit (WPA3-Enterprise)
7.2.4 Step 4 Radio
Use this screen to configure the Zyxel Device’s radio transmitter(s).
• Band: Select the radio band you want to use on this radio. The radio band is unconfigurable if the
Zyxel Device does not support BandFlex (band selection on each radio). See Section 1.2 on page 14.
• Channel Selection: Select Auto to have the Zyxel Device automatically choose a radio channel that
has least interference. Otherwise, select Manual and specify a channel the Zyxel Device will use in the
2.4 GHz or 5 GHz wireless LAN. The options vary depending on the frequency band and the country
you are in.
• Maximum Output Power: Enter the maximum output power of the Zyxel Device. If there is a high
density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with
other APs.
Note: Reducing the output power also reduces the Zyxel Device’s effective broadcast radius.
Note: See Section 1.2 on page 14 for models that support the 6 GHz band.
Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard
without saving.
To Next Page
Loading...
