Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
54
3.4.3 WAC6502D-E, WAC6502D-S, and WAC6503D-S
The following are the LED descriptions for your WAC6502D-E, WAC6502D-S, or WAC6503D-S.
Management Green On The Zyxel Device is managed by the NCC.
Slow Blinking (On for 1
sec, Off for 1 sec)
The Zyxel Device is using default WiFi settings, or the Zyxel
Device is connected to the NCC but is unregistered with
the NCC.
Amber Blinks between amber
and green alternately
(1 second interval).
The Zyxel Device is searching for (discovering) the NCC.
Green
Amber Blinks between amber
and green alternately 3
times and then turns
solid green for 3
seconds.
The NCC is connecting to the registered Zyxel Device.
Green
Off The Zyxel Device is in standalone mode.
UPLINK Amber On The port is operating as a 10/100 Mbps connection.
Blinking The Zyxel Device is sending/receiving data through the
port at 10/100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The Zyxel Device is sending/receiving data through the
port at 1Gbps.
Off The port is not connected.
WLAN Green On The 2.4 GHz WLAN is active.
Off The 2.4 GHz WLAN is not active.
WLAN Green On The 5 GHz WLAN is active.
Off The 5 GHz WLAN is not active.
LAN Amber On The port is operating as a 10/100 Mbps connection.
Blinking The LAN port is sending/receiving data through the port
at 10/100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The LAN port is sending/receiving data through the port
at 1 Gbps.
Off The LAN port is not connected.
Table 16 NWA1302-AC LEDs (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
