Chapter 10 Wireless
NWA/WAC/WAX Series User’s Guide
128
Each field is described in the following table.
10.4 Load Balancing
Use this screen to configure wireless network traffic load balancing between the APs on your network
(see Load Balancing on page 132). Click Configuration > Wireless > Load Balancing to access this
screen.
Figure 80 Configuration > Wireless > Load Balancing
Table 46 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List
LABEL DESCRIPTION
MAC Enter the MAC address of the AP you want to add to the list. A MAC address is a unique
hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a
hexadecimal number separated by colons.
Description Enter up to 60 characters for the AP’s description. Spaces and underscores are allowed.
Role Select either Rogue AP or Friendly AP for the AP’s role.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to close the window with changes unsaved.
To Next Page
Loading...
