Chapter 1 Introduction
NWA/WAC/WAX Series User’s Guide
23
Figure 2 Wireless Distribution System Network Example
The following figure shows an example of a WDS with a repeater acting as a wireless bridge. A wireless
bridge can connect two wired networks through a wireless connection. The root AP (X) is connected to
a network with Internet access. The wireless repeater (Y) is connected to the root AP (X) to expand the
network. Clients (A and B) are connected to the wireless repeater through the switch/gateway/router
(G). They can access the network with the extended wired network the wireless bridge (wireless
repeater) provides.
To Next Page
Loading...
