Chapter 21 LEDs
NWA/WAC/WAX Series User’s Guide
248
Figure 154 Maintenance > LEDs > Locator
The following table describes fields in the above screen.
Table 104 Maintenance > LED > Locator
LABEL DESCRIPTION
Turn On
Turn Off
Click Turn On button to activate the locator. The Locator function will show the actual
location of the Zyxel Device between several devices in the network.
Otherwise, click Turn Off to disable the locator feature.
Automatically Extinguish
After
Enter a time interval between 1 and 60 minutes to stop the locator LED from blinking.
Default is 10 minutes.
Apply Click Apply to save changes in this screen.
Refresh Click Refresh to update the information in this screen.
To Next Page
Loading...
