Chapter 1 Get to Know Your WAH7601
WAH7601 User’s Guide
11
None of the LEDs are on if the WAH7601 is not receiving power.
1.5 Hardware Connections
See your Quick Start Guide for more information about hardware installation.
1 Remove the lid. Remove the battery. Gently place the SIM card and lock it into place.
Note: If you have a Nano or Micro SIM card, use a SIM card adapter to correctly fit it into the
Mini SIM card slot.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
Power
Green On The WAH7601 is in the booting state and getting ready for use.
Blue On The WAH7601 is in a full charged state.
Amber On The WAH7601 is in a half charged state.
Blinking The WAH7601 is in the charging state.
Red On The WAH7601 is in a low battery charge state.
Off The WAH7601 is not turned on or not in the charging state.
SMS
Blue Blinking The WAH7601 has received an SMS (Short Message Service) message.
WiFi
Blue On The WAH7601 does not have a connection with a wireless client.
Blinking
(slow)
The WAH7601 has a connection with a wireless client.
Blinking
(fast)
The WAH7601 is setting up a WPS connection with a wireless client.
Signal
Blue On The WAH7601 is connected to a 4G LTE network.
Blinking The WAH7601’s SIM card is registered to a 4G LTE cellular network but there
is no network connection.
Green On The WAH7601 is connected to a 3G cellular network.
Blinking The WAH7601’s SIM card is registered to a 3G cellular network but there is
no network connection.
Purple On The WAH7601 is connected to a 2G cellular network.
Blinking The WAH7601’s SIM card is registered to a 2G cellular network but there is
no network connection.
Red Blinking The WAH7601 detected an error while self-testing, or there is a device
malfunction, or there is no SIM card detected.
To Next Page
Loading...
