Chapter 13 System
WAH7601 User’s Guide
94
Figure 69 System > Setting > Password
The following table describes the labels in this screen.
13.5 Session Timeout
To access this screen, click System > Setting > Password > Session Timeout. Use this screen to configure
the length of inactive time before the WAH7601 automatically logs a user out of the Web Configurator.
Enter the time in the Session Timeout (Min) field, then click Apply to save your changes.
Figure 70 System > Setting > Password > Session Timeout
13.6 Language Setting
To access this screen, click System > Setting > Language. Use this screen to select a display language for
the WAH7601 Web Configurator. Select a Language and click Apply to save your changes.
Figure 71 System > Setting > Language
Table 35 System > Setting > Password
LABEL DESCRIPTION
Current Password Type the password you are currently using to log into the WAH7601 Web Configurator.
Password Type your new system password of between 4 and 24 characters. Note that as you type a
password, the screen displays as dot (.) for each character you type.
Reenter New
Password
Type the new password again in this field.
Apply Click Apply to save your changes back to the WAH7601.
To Next Page
Loading...
