Chapter 7 Network
WAH7601 User’s Guide
49
7.8 Data Usage/Statistics
This screen allows you to enable mobile data usage control and set a monthly data limit. Click
Configuration > Network > Data Usage > Data Usage/Statistics. The screen appears as shown next.
Figure 28 Configuration > Network > Data Usage > Data Usage/Statistics
The following table describes the labels in this screen.
SSID This shows the descriptive name of the wireless network detected by the WAH7601.
Tap on an SSID and a pop-up window appears. Enter the Pre-Shared Key or
password and click Connect so the WAH7601 connects to the wireless network.
Figure 27 Pre-shared Key
Signal Strength (dBm) This shows the strength of the wireless network’s radio signal measured in dBm.
Channel This shows the channel the wireless network uses.
Encryption Type This shows the data encryption method the WAH7601 uses for the wireless
connection.
Total Num This shows the total number of wireless networks your WAH7601 detects.
Scan Click Scan to refresh the list of available wireless networks.
Table 12 Configuration > Network > WiFi Client
LABEL DESCRIPTION
Table 13 Configuration > Network > Data Usage > Data Usage/Statistics
LABEL DESCRIPTION
Enable Data Limit Select the check box to activate a limiting amount of mobile data.
Total Allowance Specify the amount of data that can be transmitted via the mobile connection (in
GB).
Notify me when data usage
reaches
Specify the percentage of data usage the WAH7601 has to reach to send a
notification.
To Next Page
Loading...
