Chapter 7 Network
WAH7601 User’s Guide
48
Figure 26 Configuration > Network > WiFi Client
The following table describes the labels in this screen.
Table 12 Configuration > Network > WiFi Client
LABEL DESCRIPTION
WiFi Client
Enable Select the check box and click Apply to enable client mode in the WAH7601.
Connected WLAN
This shows the settings of the current AP to which your WAH7601 is connected.
WiFi Client Scan Result
This shows a list of the APs the WAH7601 currently detects in the area.
BSSID This shows the MAC address of the wireless network.
To Next Page
Loading...
