Chapter 5 Status
WAH7601 User’s Guide
33
Model Number This shows the model number of your WAH7601.
Firmware Version This is the current version of the firmware inside the WAH7601.
WAN Information (These fields display when you have a WAN connection)
To change from WAN information to LAN Information click the gray arrow .
IP Address This field displays the current IPv4 address of the WAH7601 in the WAN.
IP Subnet Mask This field displays the current subnet mask in the WAN.
IPv6 Address This field displays the current IPv6 address of the WAH7601 in the WAN.
Operation Band This field displays the frequency band on which your ISP is operating.
LAN Information
To change from LAN information to WAN Information click the gray arrow .
MAC Address This shows the LAN MAC (Media Access Control) Address of your WAH7601.
IP Address This is the current IPv4 address of the WAH7601 in the LAN.
IP Subnet Mask This is the current subnet mask in the LAN.
DHCP This field displays what DHCP services the Device is providing to the LAN. Choices are:
Server - The Device is a DHCP server in the LAN. It assigns IP addresses to other devices in the
LAN.
Relay - The Device acts as a surrogate DHCP server and relays DHCP requests and
responses between the remote server and the clients.
None - The Device is not providing any DHCP services to the LAN.
IPv6 Address This is the current IPv6 address of the WAH7601 in the LAN.
System Status
System Up Time This field displays how long the WAH7601 has been running since it last started up. The
Device starts up when you plug it in, when you restart it (System > Setting > Reboot), or when
you reset it.
Current Date/Time This field displays the current date and time in the Device. You can change this in System >
Setting > Date and Time.
System Resource
CPU Usage This field displays what percentage of the WAH7601’s processing ability is currently used.
When this percentage is close to 100 %, the WAH7601 is running at full load, and the
throughput is not going to improve anymore.
Memory Usage This field displays what percentage of the Device’s memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100 %, the
WAH7601 is probably becoming unstable, and you should restart the device.
Signal Status
SIM Status This displays the status of the attached SIM card. SIM Detached displays if there is no SIM
card inserted.
Signal Strength This displays the current signal strength to the mobile network.
Signal Type This shows the type of the mobile network (such as LTE, 3G, 2G, and so on) to which the
WAH7601 is connecting.
New Message This displays the number of new messages received in your SIM card.
Roaming Status This displays whether the WAH7601 is connected to another service provider’s mobile
network using roaming.
WiFi Name This displays a descriptive name used to identify the WAH7601 in the wireless LAN.
Encryption This displays the level of wireless security the WAH7601 is using.
Table 4 Home (continued)
LABEL DESCRIPTION
To Next Page
Loading...
