ZyXEL Communications WAH7601 - 6.6 LTE Modem Status

Chapter 6 Monitor
WAH7601 User’s Guide
39
Figure 18 Monitor > LTE Modem Status
The following table describes the labels in this screen.
Table 8 Monitor > LTE Modem Status
LABEL DESCRIPTION
Modem Information
Physical Information This displays the interface used for the mobile data connection.
Module Name This displays the name of the built-in LTE module.
IMEI/MEID This displays the International Mobile Equipment Number (IMEI) or Mobile Equipment
Identifier (MEID), which is the serial number of the built-in LTE module. It is a unique 15-digit
number used to identify a mobile device.
HW Version This displays the hardware version of the built-in LTE module.
FW Version This displays the firmware version of the built-in LTE module.
SIM Status
SIM This displays the status of the inserted SIM card. No SIM displays if there is no SIM card
inserted.
PIN Code Status This displays the status of PIN code authentication.
PIN Code Remaining
Times
This displays how many times you can enter the PIN code.
PUK Code
Remaining Times
This displays how many times you can enter the PUK code.
Service Information
Operator This displays the name of the service provider.
Cell Broadcast This displays whether the one-to-many messaging service is available.
MCC This displays the Mobile Country Code (MCC), which is used to identify the country of a
mobile subscriber.