Chapter 7 Wireless
WX Series User’s Guide
102
Figure 42 Wireless > General: More Secure: WPA2-PSK
The following table describes the labels in this screen.
Table 21 Wireless > General: More Secure: WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA2-PSK data encryption.
Security Mode Select the data encryption method the WX Device uses.
Select WPA2-PSK, WPA3-SAE or WPA3-SAE/WPA2-PSK to add security on this WiFi network. The
WiFi clients which want to associate to this network must have same WiFi security settings as this
device. Or you can select No Security to allow any client to associate this network without
authentication.
Generate
password
automatically
Select this option to have the WX Device automatically generate a password. The password
field will not be configurable when you select this option.
Password Select Generate password automatically or enter a Password.
The password has two uses.
1. Manually enter the same password on the WX Device and the client. Enter 8 – 63 ASCII
characters or exactly 64 hexadecimal (‘0 – 9’, ‘a – f’) characters.
2. When using WPS, the WX Device sends this password to the client.
Click the Eye icon to show or hide the password of your WiFi network. When the Eye icon is
slashed , you will see the password in plain text. Otherwise, it is hidden.
Click this to show more fields in this section. Click again to hide them.
Encryption This field shows the AES type of data encryption.
Timer The Timer is the rate at which the RADIUS server sends a new group key out to all clients.
To Next Page
Loading...
