Chapter 1 Introduction
WX Series User’s Guide
19
Figure 8 Triple-Band Application
1.5 Daisy Chain
You can add more WX Device to your network to form a daisy chain. Daisy chain refers to the
connection from the first WX Device to up to three other WX Devices to extend the WiFi connection from
the router to the client. The WX Device uplink connection determines the mode: Access Point (AP) or
Repeater (RP).
• If the WX Device has a wired uplink connection, it is in AP mode.
• If the WX Device has a WiFi uplink connection, it is in RP mode.
Here are some example scenarios for the WX Device’s daisy chain connection:
Figure 9 Scenario 1: Three APs
Figure 10 Scenario 2: Two APs and one RP
To Next Page
Loading...
