ZyXEL Communications WX5600-T0 - 5.2 WiFi Settings

Chapter 5 Connection Status
WX Series User’s Guide
77
Each field is described in the following table.
5.2 WiFi Settings
Use this screen to configure the main WiFi network settings. Slide the switch to the right ( ) to enable
WiFi on the WX Device.
Use this screen or the QR code on the upper right to check the SSIDs (WiFi network name) and
passwords of the main WiFi networks. The WiFi passwords are hidden by default. Click click the Eye icon
( ) to display WiFi passwords.
Table 14 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the WX Device system name. It is used for identification.
Model Name This shows the model number of your WX Device.
Serial Number This field displays the serial number of the WX Device.
Firmware Version This is the current version of the firmware on the WX Device.
System Uptime This field displays how long the WX Device has been running since it last started up. The WX
Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or when
you reset it.
CPU Usage This displays the current CPU usage percentage.
Memory Usage This displays the current RAM usage percentage.
Interface Status
Virtual ports are shown here. You can see whether the ports are in use and their transmission rate.
LAN Information (These fields display information about the LAN ports.)
IP Address This is the current IPv4 address of the WX Device in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
IPv6 Address This is the current IPv6 address of the WX Device in the LAN.
IPv6 Link Local
Address
This field displays the current link-local address of the WX Device for the LAN interface.
MAC Address This field displays the LAN Ethernet adapter MAC (Media Access Control) address of your WX
Device.
WLAN Information 2.4 GHz/ 5 GHz/ 6 GHz
MAC Address This shows the WiFi adapter MAC (Media Access Control) address of the WiFi interface.
Status This displays whether WiFi is activated.
SSID This is the descriptive name used to identify the WX Device in a WiFi network.
Channel This is the channel number used by the WiFi interface now.
Security This displays the type of security mode the WiFi interface is using in the WiFi network.
802.11 Mode This displays the type of 802.11 mode the WiFi interface is using in the WiFi network.
WPS This displays whether WPS is activated on the WiFi interface.