WX Series User’s Guide
38
CHAPTER 4
App Tutorials
4.1 Overview
This shows you how to use the MPro Mesh app to manage the WX Device and its Mesh network.
4.2 What You Can Do
• To set up your WX Device with a Zyxel MPro Mesh router using a WiFi connection; see Section 4.3.1 on
page 38.
• To set up your WX Device with a non-MPro Mesh router using a wired connection; see Section 4.3.2 on
page 43.
• Use the Home screen to reboot your WX Device or add WX Devices to your network; see Section 4.4
on page 50.
• Use the Devices screen to view the information of WiFi clients connected to the WX Device; see
Section 4.5 on page 62.
• Use the WiFi Settings screen to configure your main or guest WiFi network; see Section 4.6 on page 64.
• Use the Account screen to view your app version or logout; see Section 4.8 on page 70.
4.3 Network Setup
There are several ways to set up your WX Device. You can set it up with a Zyxel MPro Mesh router using a
wired or WiFi connection. Alternatively, you can set it up with a non-MPro Mesh router with a wired
connection. This section shows you how to connect to a Zyxel MPro Mesh router wirelessly and how to
connect to a non-MPro Mesh router with an Ethernet cable. See the following table for more
information.
4.3.1 Setting up the WX Device with a Zyxel MPro Mesh Router
Follow the steps below to set up your WX Device with the Zyxel MPro Mesh router. This section uses the
WX3401-B0 and DX5301-B0 as an example.
Table 11 Network Setup Scenario
SCENARIO ZYXEL MPRO MESH ROUTER NON-ZYXEL MPRO MESH ROUTER
Wired connection from the router to the
WX Device
Yes Yes (see Section 4.3.2 on page 43)
WiFi connection Yes (see Section 4.3.1 on page
38)
No
To Next Page
Loading...
