Chapter 5 Connection Status
WX Series User’s Guide
80
Figure 37 Guest WiFi Settings: Configuration
Each field is described in the following table.
Table 16 WiFi Settings: Configuration
LABEL DESCRIPTION
2.4G/5G/6G WiFi Slide the switch to the right to enable the 2.4G, 5G or 6G WiFi networks.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a WiFi device is associated.
WiFi devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters).
WiFi Password If you selected Random Password, this field displays a pre-shared key generated by the WX
Device.
If you did not select Random Password, you can manually type a pre-shared key from 8 to 64
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your WiFi network. When the Eye icon is
slashed , you will see the password in plain text. Otherwise, it is hidden.
Random Password Select this option to have the WX Device automatically generate a password. The WiFi
Password field will not be configurable when you select this option.
Hide WiFi network
name
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Note: To hide the WX Device WiFi SSIDs, you need to first disable WPS in Network
Setting > Wireless > WPS.
Save Click Save to save your changes.
To Next Page
Loading...
