103/255
8 Go to CONFIGURATION > Network > Routing > Policy Route > Add to configure a
policy route.
Source Address: LAN1_SUBNET (192.168.1.0/24)
Destination Address: BO_subnet (192.168.11.0/24)
Next-Hop: HQ_vti_trunk
SNAT: none
CONFIGURATION > Network > Routing > Policy Route > Add
9 Connect the VPN tunnels when the VTIs are ready. Go to CONFIGURATION > VPN >
IPSec VPN > VPN Connection to connect the VPN tunnels.
CONFIGURATION > VPN > IPSec VPN > VPN Connection > Connect
To Next Page
Loading...
