ZyXEL Communications ZyWALL 310 - Set up the WAN Trunk (Zywall;Usg_Hq)

92/255
www.zyxel.com
Figure 149 Configuration > VPN > IPSec VPN > VPN Gateway > Gateway Settings
Set up the WAN Trunk (ZyWALL/USG_HQ)
Go to CONFIGURATION > Interface > Trunk > User Configuration > Add. Select
wan1 and wan2 into the trunk Member and set wan2 Mode to be Passive.
Figure 150 CONFIGURATION > Interface > Trunk > User Configuration > Add