ZyXEL Communications ZyWALL 310 - How to Set up Ipv6 Interfaces for Pure Ipv6 Routing

231/255
www.zyxel.com
How to Set Up IPv6 Interfaces For Pure IPv6 Routing
This example shows how to configure your USG Z’s WAN and LAN interfaces which
connects two IPv6 networks. USG Z periodically advertises a network prefix of
2006:1111:1111:1111::/64 to the LAN through router advertisements.
Figure 346 ZyWALL/USG access the internet via IPv6
Note:
Instead of using router advertisement, you can use DHCPv6 to pass the
network settings to the computers on the LAN.
This example was tested using USG110 (Firmware Version: ZLD 4.15) and
ZyWALL 310 (Firmware Version: ZLD 4.15).