58/255
Set Up the DNS Service
In this scenario, you need to have a DNS host to fulfill the requirement. In this
example, go to https://www.noip.com/ to register an account and create a
DNS host. The following mapping IP address is the public IP of the ZyWALL/USG's
WAN IP address.
Figure 88 Host by Domain
Set Up the ZyWALL/USG SSL VPN Setting
In the ZyWALL/USG, go to CONFIGURATION > VPN > SSL VPN > Global Setting
> SSL VPN Login Domain Name and type in the DNS domain name.
Figure 89 CONFIGURATION > VPN > SSL VPN > Global Setting > SSL VPN Login Domain
Name
Use SSL VPN, you need to allow users to access the HTTPS service. Go
to CONFIGURATION > Security Policy > Policy Control. Make sure the security
policy allows HTTPS traffic from the WAN interface to the ZyWALL (the example
shows the default settings).
To Next Page
Loading...
