118/255
Figure 165 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings > Wizard
Completed
Go to CONFIGURATION > VPN > VPN Gateway > WIZ_L2TP_VPN, change
Authentication method to be Certificate and select the certificate which
ZyWALL/USG uses to identify itself to the Android mobile phone.
Figure 166 CONFIGURATION > VPN > VPN Gateway > WIZ_L2TP_VPN > Authentication
> Certificate
Go to CONFIGURATION > VPN > L2TP VPN > Create new Object > User to add User
Name and Password (4-24 characters). Then, set Allowed User to the newly created
object (L2TP_Remote_Users/zyx168 in this example).
To Next Page
Loading...
