130/255
Assign the L2TP users’ IP address range from 192.168.100.10 to 192.168.100.20 for use in
the L2TP VPN tunnel and select Allow L2TP traffic Through WAN to allow traffic from L2TP
clients to go to the Internet. Click OK.
Figure 184 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (L2TP VPN
Settings)
This screen provides a read-only summary of the VPN tunnel. Click Save.
Figure 185 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (Summary)
To Next Page
Loading...
