15/255
Continue to Phase 2 Settings to select the Encapsulation, Encryption,
Authentication, and SA Life Time settings which Amazon VPC supports.
Set Local Policy to be the IP address range of the network connected to the
ZyWALL/USG and Remote Policy to be the IP address range of the network connected
to the Amazon VPC. Click OK.
Figure 13 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN
Settings (Phase 2 Setting)
This screen provides a read-only summary of the VPN tunnel. Click Save.
Figure 14 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN
Settings (Summary)
To Next Page
Loading...
