ZyXEL Communications ZyWALL Series - Page 337

Chapter 40 Reputation Filter
ZyWALL Series CLI Reference Guide
337
• If the external black list file contains any invalid entries, the Zyxel Device will not use the file.
Table 183 Commands for URL Threat Filter External Black List
COMMAND DESCRIPTION
[no] threat-website ebl
activate
Enables or disables the URL Threat Filter external black list.
When enabled, the Zyxel Device blocks incoming packets that come from
the listed addresses in the black list file.
threat-website ebl <profile
name>
Enters the subcommand mode for the specified external black list profile. If
the profile does not exist, the Zyxel Device creates it.
Note: After creating a new profile, you must add a source URL.
Failure to do so might result in an error when starting the
Zyxel Device.
description <description> Enter a description of the external black list file.
The description must consist of 1–60 characters, and may include letters,
numbers, and the following special characters:
()+/:=?!*#@$_%-
Use the no command to delete the description for this profile.
source <url>
Adds the URL of the external black list file.
For example, https://zyxel.com.tw/blacklist-files/myip-ebl.txt.
The server must be reachable from the Zyxel Device.
no threat-website ebl
<profile name>
Deletes the specified external black list profile.
threat-website ebl rename
old_profile_name
new_profile_name
Renames the specified external black list profile.
[no] threat-website ebl
update auto
Sets the Zyxel Device to automatically check for updates to the URL Threat
Filter external black list at the time and day specified. You should select a
time when your network is not busy for
The [no] command disables the automatic updates.
threat-website ebl update
hourly
Sets the Zyxel Device to automatically check for updates to the URL Threat
Filter external black list once per day, at the specified hour.
threat-website ebl update
daily <0..23>
Sets the Zyxel Device to update the URL Threat Filter external black list every
day at the specified time. For example, the time format is the 24 hour
clock, so ‘23’ means 11 PM.
threat-website ebl update
weekly {sun
|mon|tue|wed|thu|fri|sat}
<0..23>
Sets the Zyxel Device to automatically check for updates to the URL Threat
Filter external black list file once per week, on the specified day at the
specified hour.
threat-website ebl update
Checks for updates to the URL Threat Filter external black list file
immediately.
show threat-website ebl
Shows all URL Threat Filter external black list profiles.
show threat-website ebl
<profile name>
Shows the specified URL Threat Filter external black list profile.
show threat-website ebl
signature update
Shows whether automatic external black list updates are enabled, and the
schedule for the updates.