Chapter 5 Registration
ZyWALL Series CLI Reference Guide
54
• SSL VPN tunnels provide secure network access to remote users. You can purchase and enter a
license key to have the Zyxel Device use more SSL VPN tunnels.
• Content filter allows or blocks access to web sites. Subscribe to category-based content filtering to
block access to categories of web sites based on content. Your Zyxel Device accesses an external
database that has millions of web sites categorized based on content. You can have the Zyxel
Device block, block and/or log access to web sites based on these categories.
• You will get automatic e-mail notification of new signature releases from mySecurityZone after you
activate the IDP/AppPatrol service. You can also check for new signatures at http://
mysecurity.zyxel.com.
See the respective chapters for more information about these features.
Note: To update the signature file or use a subscription service, you have to register the Zyxel
Device and activate the corresponding service at myZyxel (through the Zyxel Device).
5.1.2 Firewall as a Service (FaaS) License
The Zyxel Device FaaS allows you to use the Zyxel Device and its features, such as security, routing, VPN
and sandboxing.
The FaaS license is valid for 1 year and 30 days (trail period) from the date of purchase. It has a 15-day
grace period after which the license expires. During the grace period, you cannot configure the Zyxel
Device but you can continue to use it. After the grace period ends, your Zyxel Device will stop working.
Please note the following limitations if you purchase a Zyxel Device with a FaaS license:
• You need to renew your FaaS license after it expires to continue using the Zyxel Device. You can
renew your FaaS license automatically or renew it manually.
• The Zyxel Device with FaaS does not support firmware version earlier than 5.20.
• You cannot buy licenses for security services individually.
• you cannot use Nebula to manage your Zyxel Device.
5.2 Registration Commands
The following table describes the commands available for registration. You must use the configure
terminal
command to enter the configuration mode before you can use these commands.
Table 11 Command Summary: Registration
COMMAND DESCRIPTION
service-register checkexpire
Gets information of all service subscriptions from myZyxel
and updates the status table.
service-register _setremind {after-10-
days | after-180-days | after-30-days |
every-time | never}
Sets how often you want to display the network risk
warning screen in the Web Configurator. The screen shows
the security services which are not registered or disabled
on the Zyxel Device.
show device-register status
Displays whether the device is registered and account
information.
To Next Page
Loading...
