ZyXEL Communications ZyWALL Series - 65.8 Cloud Helper Commands

Chapter 65 File Manager
ZyWALL Series CLI Reference Guide
549
Figure 43 FTP Configuration File Download Example
65.8 Cloud Helper Commands
Cloud Helper lets you know if there is a later firmware available on the Cloud Helper server and lets you
download it one is available.
Note: To use this feature, you must register your Zyxel Device at myZyxel.com.
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 FTP Server (ZyWALL) [192.168.1.1]
User (192.168.1.1:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> cd conf
250 CWD command successful
ftp> get today.conf current.conf
200 PORT command successful
150 Opening BINARY mode data connection for conf/today.conf
(20220 bytes)
226 Transfer complete.
ftp: 20220 bytes received in 0.03Seconds 652.26Kbytes/sec.
Table 319 Cloud Helper Commands
COMMAND DESCRIPTION
show cloud-helper autoupdate
firmware
Shows if automatically updating firmware is enabled, the schedule
and if automatically rebooting the Zyxel Device is enabled (meaning
the uploaded firmware becomes the running firmware.
show cloud-helper firmware
Displays latest firmware information available on the Cloud Helper
server.
show cloud-helper highlight
Displays the number of unread notifications.
show cloud-helper notify_all
Displays all notifications on the Zyxel Device, including the name,
description, and URL.
show cloud-helper remind
Displays whether the popup reminder about new available firmware
is enabled or disabled.
show cloud-helper retry
Shows the number of retry_times, retry_period and retry_fail_period.
retry_times: The number of attempts allowed to download items.
retry_period: The length of time between download attempts.
retry_fail_period: The retry interval after retry attempts have
expired.
cloud-helper check all
Sends a query to the Cloud Helper Server to get the latest firmware,
Geo IP, IDP signature and SSL CA certificate information.
cloud-helper check app
Sends a query to the Cloud Helper Server to get the latest App Patrol
signature information.
cloud-helper check app_incr
Sends a query to the Cloud Helper Server to get the latest
incremental App Patrol signature information.