ZyWALL Series CLI Reference Guide
509
CHAPTER 62
Dynamic Guest Accounts
62.1 Dynamic Guest Accounts Overview
Dynamic guest accounts are guest accounts, but are created dynamically and stored in the Zyxel
Device’s local user database. A dynamic guest account has a dynamically-created user name and
password. A dynamic guest account user can access the Zyxel Device’s services only within a given
period of time and will become invalid after the expiration date/time.
There are three types of dynamic guest accounts depending on how they are created or
authenticated: billing-users, ua-users and trial-users.
billing-users are guest account created with the dynamic-guest generate command or the guest
manager account or an external printer and paid by cash or created and paid via the on-line payment
service.
ua-users are users that log in from the user agreement page.
trial-users are free guest accounts that are created with the dynamic-guest generate-freeuser
command or the Free Time function.
62.2 Dynamic-guest Commands
This table lists the dynamic-guest commands. You must use the configure terminal command to
enter the configuration mode before you can use these commands.
Table 289 dynamic-guest Commands
COMMAND DESCRIPTION
dynamic-guest freeuser user_name
Creates a free dynamic guest account (trial-user) with the specified user name
and enters the dynamic-guest sub-command mode to set the password and
timeout settings. See Table 290 on page 510 for the sub-commands.
dynamic-guest generate
Sets the Zyxel Device to automatically create a dynamic guest account
(billing-user) and enters the dynamic-guest sub-command mode to set the
password and timeout settings. See Table 290 on page 510 for the sub-
commands.
dynamic-guest generate-freeuser
Sets the Zyxel Device to automatically create a free dynamic guest account
(trial-user) and enters the dynamic-guest sub-command mode to set the
password and timeout settings. See Table 290 on page 510 for the sub-
commands.
dynamic-guest keep-user-logged-in
[no] dynamic-guest user_name
Creates a dynamic guest account (billing-user) with the specified user name
and enters the dynamic-guest sub-command mode to set the password and
timeout settings. See Table 290 on page 510 for the sub-commands.
The no command removes the specified dynamic-guest account.
To Next Page
Loading...
