ZyXEL Communications ZyWALL Series - Page 401

Chapter 44 Anti-Spam
ZyWALL Series CLI Reference Guide
401
[no] log [alert]
Sets the Zyxel Device to create a log (and optionally an alert)
when packets match this rule and are found to be spam. The
no command sets the Zyxel Device not to create a log or alert
when packets match this rule.
[no] scan {smtp | pop3}
Sets the protocols of traffic to scan for spam.
[no] match-action pop3 {forward
| forward-with-tag}
Sets the action to take when the Zyxel Device detects a spam
POP3 e-mail. The file can be forwarded or forwarded with a
spam tag.
[no] match-action smtp {drop |
forward | forward-with-tag}
Sets the action to take when the Zyxel Device detects a spam
SMTP e-mail. The file can be deleted, forwarded, or forwarded
with a spam tag.
[no] bypass {white-list |
black-list | dnsbl}
Bypassing has the Zyxel Device not check files against your
configured white (allowed) list, black (spam) list, or DNSBL
servers list.
[no] bypass {ip-reputation |
mail-content | virus-outbreak}
Firmware 4.55 or earlier
Has the Zyxel Device not check mail’s IP reputation, content, or
for viruses.
[no] bypass mail-phishing
Firmware 4.60 or later
Has the Zyxel Device not check emails for suspicious links.
show
Displays the details of the anti-spam rule you are configuring.
anti-spam profile move rule_number
to rule_number
Moves an anti-spam profile to the number that you specified.
anti-spam profile delete
rule_number
Removes an anti-spam profile.
show anti-spam profile
[rule_number]
Displays the details of all the configured anti-spam profiles.
[no] anti-spam ip-reputation
activate
Firmware 4.55 or earlier
Sets whether or not to use IP reputation to identify spam by the
sender’s IP address.
anti-spam ip-reputation query-
timeout time [timeout]
Firmware 4.55 or earlier
Sets how many seconds the Zyxel Device waits for a reply when
checking the IP reputation of a sender’s IP address.
anti-spam ip-reputation statistics
flush
Firmware 4.55 or earlier
Clears the anti-spam statistics showing how many emails were
detected as spam using the IP Reputation filter.
[no] anti-spam ip-reputation
private-check activate
Firmware 4.55 or earlier
Sets whether or not to check the IP reputation of private sender
IP addresses.
[no] anti-spam mail-content
activate
Firmware 4.55 or earlier
Sets whether or not to identify spam by content, such as
malicious content.
[no] anti-spam mail-phishing
activate
Sets whether or not to identify emails sent from suspicious
websites known for phishing.
Table 215 Commands for Anti-Spam Profile Rules (continued)
COMMAND DESCRIPTION