ZyXEL Communications ZyWALL USG 300 - Create the WLAN Interface

Chapter 7 Tutorials
ZyWALL USG 300 User’s Guide
126
1 Click Configuration > Object > User/Group > User and the Add icon.
2 Set the User Name to wlan_user. Enter (and re-enter) the user’s password.
Click OK.
Figure 72 Configuration > Object > User/Group > User > Add
3 Use the Add icon in the Configuration > Object > User/Group > User screen
to set up the remaining user accounts in similar fashion.
7.4.2 Create the WLAN Interface
1 Click Configuration > Network > Interface > WLAN > Add to open the
WLAN Add screen.