Chapter 57 Troubleshooting
ZyWALL USG 300 User’s Guide
939
3 The Delete Browsing History screen appears. Select Temporary Internet
files and then click Delete.
4 Click the OK button in the Internet Options screen to confirm the setting.
5 Close all Internet Explorer windows and then open a new one.
6 Log into the ZyWALL’s Web Configurator again. You should see the missing
widgets now.
57.1 Resetting the ZyWALL
If you cannot access the ZyWALL by any method, try restarting it by turning the
power off and then on again. If you still cannot access the ZyWALL by any method
or you forget the administrator password(s), you can reset the ZyWALL to its
factory-default settings. Any configuration files or shell scripts that you saved on
the ZyWALL should still be available afterwards.
Use the following procedure to reset the ZyWALL to its factory-default settings.
This overwrites the settings in the startup-config.conf file with the settings in the
system-default.conf file.
Note: This procedure removes the current configuration.
To Next Page
Loading...
