ZyXEL Communications ZyWALL USG 300 - USB Storage Screen

Chapter 10 Monitor
ZyWALL USG 300 User’s Guide
256
10.11 USB Storage Screen
This screen displays information about a connected USB storage device. Click
Monitor > System Status > USB Storage to display this screen.
Figure 242 Monitor > System Status > USB Storage
The following table describes the labels in this screen.
Signal Quality This displays the strength of the signal. The signal strength mainly
depends on the antenna output power and the distance between your
ZyWALL and the service provider’s base station.
More Info. This field displays other details about the 3G connection.
Table 39 Monitor > System Status > Cellular Status (continued)
LABEL DESCRIPTION
Table 40 Monitor > System Status > USB Storage
LABEL DESCRIPTION
Device
description
This is a basic description of the type of USB device.
Usage This field displays how much of the USB storage device’s capacity is
currently being used out of its total capacity and what percentage that
makes. This field displays Unknown if the file system of the USB
storage device is not supported by the ZyWALL, such as NTFS.
Filesystem This field displays what file system the USB storage device is formatted
with.
Speed This field displays the connection speed the USB storage device
supports.