ZyXEL Communications ZyWALL USG 300 - The SSL Global Setting Screen; Ssl Vpn

Chapter 26 SSL VPN
ZyWALL USG 300 User’s Guide
521
26.3 The SSL Global Setting Screen
Click VPN > SSL VPN and click the Global Setting tab to display the following
screen. Use this screen to set the IP address of the ZyWALL (or a gateway device)
on your network for full tunnel mode access, enter access messages or upload a
custom logo to be displayed on the remote user screen.
Figure 373 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
OK Click Ok to save the changes and return to the main Access Privilege
screen.
Cancel Click Cancel to discard all changes and return to the main Access
Privilege screen.
Table 138 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL DESCRIPTION
Table 139 VPN > SSL VPN > Global Setting
LABEL DESCRIPTION
Global Setting
Network
Extension Local
IP
Specify the IP address of the ZyWALL (or a gateway device) for full
tunnel mode SSL VPN access.
Leave this field to the default settings unless it conflicts with another
interface.
SSL VPN Login
Domain Name