ZyWALL USG 300 User’s Guide
815
CHAPTER 50
System
50.1 Overview
Use the system screens to configure general ZyWALL settings.
50.1.1 What You Can Do in this Chapter
•Use the System > Host Name screen (see Section 50.2 on page 816) to
configure a unique name for the ZyWALL in your network.
•Use the System > USB Storage screen (see Section 50.3 on page 817) to
enable or disable the ZyWALL’s use of a connected USB storage device.
•Use the System > Date/Time screen (see Section 50.4 on page 818) to
configure the date and time for the ZyWALL.
•Use the System > Console Speed screen (see Section 50.5 on page 822) to
configure the console port speed when you connect to the ZyWALL via the
console port using a terminal emulation program.
•Use the System > DNS screen (see Section 50.6 on page 822) to configure the
DNS (Domain Name System) server used for mapping a domain name to its
corresponding IP address and vice versa.
•Use the System > WWW screens (see Section 50.7 on page 830) to configure
settings for HTTP or HTTPS access to the ZyWALL and how the login and access
user screens look.
•Use the System > SSH screen (see Section 50.8 on page 847) to configure
SSH (Secure SHell) used to securely access the ZyWALL’s command line
interface. You can specify which zones allow SSH access and from which IP
address the access can come.
•Use the System > TELNET screen (see Section 50.9 on page 852) to configure
Telnet to access the ZyWALL’s command line interface. Specify which zones
allow Telnet access and from which IP address the access can come.
•Use the System > FTP screen (see Section 50.10 on page 854) to specify from
which zones FTP can be used to access the ZyWALL. You can also specify from
which IP addresses the access can come. You can upload and download the
ZyWALL’s firmware and configuration files using FTP. Please also see Chapter 52
on page 887 for more information about firmware and configuration files.
To Next Page
Loading...
