Chapter 11 Registration
ZyWALL USG 300 User’s Guide
284
The following table describes the labels in this screen.
Table 54 Configuration > Licensing > Registration
LABEL DESCRIPTION
General Settings If you select existing myZyXEL.com account, only the User
Name and Password fields are available.
new myZyXEL.com
account
If you haven’t created an account at myZyXEL.com, select this
option and configure the following fields to create an account and
register your ZyWALL.
existing
myZyXEL.com
account
If you already have an account at myZyXEL.com, select this option
and enter your user name and password in the fields below to
register your ZyWALL.
UserName Enter a user name for your myZyXEL.com account. The name
should be from six to 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Check Click this button to check with the myZyXEL.com database to
verify the user name you entered has not been used.
Password Enter a password of between six and 20 alphanumeric characters
(and the underscore). Spaces are not allowed.
Confirm Password Enter the password again for confirmation.
E-Mail Address Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Country Select your country from the drop-down box list.
Seller Details Use this section to enter your seller information.
Seller’s Name Enter your seller’s name.
Seller’s E-mail Enter your seller’s e-mail address.
Seller’s Contact
Number
Enter your seller’s phone number.
VAT Number Enter your seller’s Value-Added Tax number, if you bought your
ZyWALL from Europe.
I accept the terms in
the Privacy Policy
If you accept the privacy policy statement shown above this field,
select this check box.
Trial Service
Activation
Select the check box to activate a trial service subscription. The
trial period starts the day you activate the trial. After the trial
expires, you can buy an iCard and enter the license key in the
Registration Service screen to extend the service.
Anti-Virus Signature
Service
The ZyWALL’s anti-virus packet scanner uses the signature files on
the ZyWALL to detect virus files.
Select ZyXEL’s anti-virus engine or the Kaspersky anti-virus
engine. During the trial you can use these fields to change from
one anti-virus engine to the other.
After the service is activated, the ZyWALL can download the up-to-
date signature files for the selected anti-virus engine from the
update server (http://myupdate.zywall.zyxel.com).