Chapter 53 Diagnostics
ZyWALL USG 300 User’s Guide
902
Note: New capture files overwrite existing files of the same name. Change the File
Suffix field's setting to avoid this.
Figure 600 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
Table 267 Maintenance > Diagnostics > Packet Capture
LABEL DESCRIPTION
Interfaces Enabled interfaces (except for virtual interfaces) appear under
Available Interfaces. Select interfaces for which to capture
packets and click the right arrow button to move them to the
Capture Interfaces list. Use the [Shift] and/or [Ctrl] key to select
multiple objects.
IP Type Select the protocol of traffic for which to capture packets. Select
any to capture packets for all types of traffic.
Host IP Select a host IP address object for which to capture packets. Select
any to capture packets for all hosts. Select User Defined to be
able to enter an IP address.
Host Port This field is configurable when you set the IP Type to any, tcp, or
udp. Specify the port number of traffic to capture.
Continuously
capture and
overwrite old ones
Select this to have the ZyWALL keep capturing traffic and
overwriting old packet capture entries when the available storage
space runs out.
To Next Page
Loading...
