164
4.1.7 FTP LAN-to-DMZ Bandwidth Management
Example
FTP traffic from the LAN1 to the DMZ can use more bandwidth since the interfaces support up to 1
Gbps connections, but give it lower priority and limit it to avoid interference with other traffic.
• Limit both outbound and inbound traffic to 50 Mbps.
• Set fifth highest priority (5) for the FTP traffic.
Figure 40 FTP LAN-to-DMZ Bandwidth Management Example
1 In the Configuration > BWM screen, click Add.
2 In the Add Policy screen, select Enable and type FTP LAN-to-DMZ as the policy’s name.
To Next Page
Loading...
