165
Select lan1 as the incoming interface and dmz as the outgoing interface.
Select App Patrol Service and ftp as the service type.
Type 10240 (kbps) with priority 5 for both the inbound and outbound guaranteed bandwidth. Do
not select the Maximize Bandwidth Usage. Set the maximum to 51200 (kbps). Click OK.
Finally, in the BWM screen, select Enable BWM. Click Apply.
4.1.8 What Can Go Wrong?
• The “outbound” in the guaranteed bandwidth settings apply to traffic going from the connection
initiator to the outgoing interface. The “inbound” refers to the reverse direction.
• Make sure you have registered the IDP/App.Patrol service on the USG to use App Patrol Service
as the service type in the bandwidth management rules. The application patrol service uses the
To Next Page
Loading...
