2N EasyGate Pro - Page 44

User Guide 2N® EasyGate PRO
44 / 87
   – Disable (0)
Default setting: Enable

Wireless network selection (Function No. 705)(SIM2-755)
You can select the network connection technology, for UMTS gateways only.
   Setting options: UMTS & GSM (0) – automatic selection, UMTS preferred
                UMTS only (1)
                GSM only (2)
Default setting: UMTS & GSM

Setting of SIM switching – dual SIM version only
SIM2 enable Function No.: 790
You can disable using off SIM2 on dual SIM gateway.
Setting options: Enable (0)
Disable (1)
Default setting: Enable

Return to SIM1 after Function No.: 791
Set time interval for SIM1 checking, if EasyGate is switched to SIM2 for reason of weak signal or
some other issue. Select Off, if you want to switch back to SIM1 only if problem occurs on SIM2.
\n\nSetting options:\n-1 Hour\n-1 Day\n-Off\nDefault setting: 1 Hour
Setting options: 1 Hour (0)
1 Day (1)
Off (2)
Default setting: 1 Hour
Low Credit Checking with Prepaid SIM– SIM1 only
Time period for low credit checking [h] (Function No. 710)
Set the change time interval between credit checks. If your credit drops under the defined
value,2N
®
EasyGate sends a "LOW CREDIT" SMS. The "0" setting means that the function is
disabled.