To Next Page

To Previous Page

User Guide 2N® EasyGate PRO

74 / 87

SMS Syntax: EG DEF password

Example: EG DEF 12345

12345 – password for programming, here is default value

3. Restart

SMS Syntax: EG RST password

Example: EG RST 12345

12345 – password for programming, here is default value

The answer to the SMS:

EG.CNF OK Correct setting

EG.DEF OK Default values restored

EG.RST OK Correct restart

EG.ERR Invalid Message Keyword EG missing

EG.ERR Unknown Command Different command than CNF, DEF, RST

EG.ERR Invalid Password Invalid Password

EG.ERR Invalid Parameters Invalid parameter in CNF command

EG.ERR Invalid Syntax Error in spaces or other syntax

Programming Lift1 communicator using EasyGate

Special version of EasyGate allows to program connected communicator Lift1 using SMS.

EasyGate receives SMS with demand to program Lift1. EasyGate than establishes connection to

L1 by phone line and performs programming using CPC protocol.

Supports 4 types of SMS commands

1. Config

SMS syntax: L1 CNF keyword parameter1=value parameter2=value Following example

programs call numbers -. parameters 011 and 012: L1 CNF 12345 011=00420222222222

012=00420111111111

2. Default config setting

SMS syntax: L1 DEF keyword

3. Selection of profile n (when you select profile 1, the same as previous command) SMS

syntax: L1 SET keyword n

4. Restart

SMS syntax: L1 RST keyword

It is not possible to combine more commands in one SMS.

Other manuals for 2N EasyGate Pro

Questions and Answers:

Need help?

Do you have a question about the 2N EasyGate Pro and is the answer not in the manual?

General