To Next Page

To Previous Page

User Guide 2N® EasyGate PRO

73 / 87

SIM2:2302;Home;3G;-77dBm Dual SIM version only

Power:On Line power

Battery:Ok Battery status

Expire in:730 Time to battery change (days)

To use this function, following parameters must be set:

Checking SMS: 967

Id text: 968

Battery status SMS: 962

Power failure SMS: 963

Telephone number for service SMS: 714

SMS EasyGate programming

Special versions of EasyGate have the possibility to program parameters using SMS. When is this

service allowed, the SMS receiving thru serial port is blocked. This option is available with

special firmware only, information about types supporting this option are supplied by the

producer.

When you program any parameter which consists of string, the text must be in brackets () and no

brackets are allowed inside of the text.

Following operations can be performed using SMS. For every operation separated SMS is

needed.

1. Configuration

Parameter value change (see the table of parameters below). As the separation character is

used space. When the text is set, it must be closed in brackets. More parameters can be set

in one SMS, the maximal length of SMS is 160 characters for 7-bit SMS, 140 characters for 8-

bit SMS. When the setting out of permitted limits is demanded or other error occur, none of

parameters is changed.

SMS syntax: EG CNF password parameter_number=new_value

Example: EG CNF 12345 101=10 706=(internet.t-mobile.cz)

EG CNF – declaration that this is configuration SMS for EG

12345 – password for programming, here is default value

101=10 – time to dial is set to 10 s

706=(internet.t-mobile.cz) – APN setting to T-Mobile CZ

2. Default setting

Restore default setting of EasyGate. After this operation automatic restart follows.

Other manuals for 2N EasyGate Pro

Questions and Answers:

Need help?

Do you have a question about the 2N EasyGate Pro and is the answer not in the manual?

General