2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 20/104
CodeEntered
The block defines the event generated by entering of a numeric code CodeEntered
and confirmation with the * key (for numeric keypad models only).
Input parameters
Code – define the numeric code.
Valid values:
numeric code – 12345, e.g.
valid – any valid code
invalid – any invalid code
any – any valid or invalid code
SuppressTones – suppress sound signalling initiated by receiving of an invalid
numeric code. The parameter is optional.
Valid values:
disabled – tones are not suppressed
enabled – tones are suppressed (default value).
Output parameters
Event – the Event invoke connected Event or Action.
Code – the received numeric code which was the last to generate this event.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple