2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 55/104
PlayUserSound
The block defines the user sound playing action.PlayUserSound
Parameters
– define the event to launch this action.Event
– define the condition to be met for the action to be executed. This Condition
parameter is optional.
– define the sound to be played.Sound
Valid values for user defined sounds:
– user sound number1– 10
Valid values for predefined sounds (asterisk before the number indicates
the use of predefined sound):
– Modern Ringtone*1
– Huge gong*2
– Dogs barking*3
– Horn/siren*4
– Gentle gong*5
– define the user sound playing destination.Destination
Valid values:
– the sound is played on the intercom.speaker
– the sound is played into the call.call
The parameter is optional; the default value is . speaker
Example
Play user sound 1 if the event defined on row 2 arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple